.jpg)
.jpg)
Cat® 773E
- Nominal Payload
- 55.5 t
- Engine Model
- Cat® 3412E
- Top Speed
- 62.2 km/h
- Description
-
- Designed for performance, designed for comfort, built to last.
Contact Your Dealer
UP TO
7%
MORE POWER
Maximize power to the ground with an increase in torque and a higher speed on grade
MAXIMIZING EFFICIENCY
Experience higher levels of efficiency using advanced engineering and software
ENHANCED SAFETY
Grouped, ground level engine and machine controls allow for safe and easy daily maintenance
Allows 30-50% faster engine service (changing most oil and filters). Improves service scheduling, allows servicing during normal work hours and reduces total engine service time.
The four stroke design uses long power strokes for complete fuel combustion and optimum efficiency. High displacement/low speed rating extends engine life and meets China Nonroad Stage II Emissions Standards.
The ARC electronically controls braking on grade to maintain approximately 2,230 rpm (engine rpm is adjustable from 2,150-2,300 rpm in increments of 10 rpm). ARC is deactivated when the operator applies the brakes or throttle.
The ROPS/FOPS cabin has electric power window, electro-hydraulic hoist lever, trainer's seat, front brake cut-off switch, backlit LED gear numbers, and optional heater and air conditioner.
The 773E frame uses 20 castings in high stress areas with deep penetrating and continuous wrap-around welding. Mild steel provides flexibility, durability and resistance to impact loads even in cold climates.
High rimpull and cushioned shifts with direct drive's efficiency and performance.
PRODUCT SPECIFICATIONS FOR CAT 773 E
| Engine Model | Cat® 3412E |
| Rated Engine Speed | 2000 r/min |
| Gross Power - SAE J1995 | 710 HP |
| Net Power - SAE J1349 | 672 HP |
| Net Power - Cat | 672 HP |
| Flywheel Power | 672 HP |
| Net Power - ISO 9249 | 672 HP |
| Net Power - 80/1269/EEC | 672 HP |
| Net Power - DIN 70020 | 681 PS |
| Number of Cylinders | 12 |
| Torque Rise | 40 % |
| Bore | 5.4 in |
| Stroke | 6 in |
| Displacement | 1649 in³ |
| Peak Torque | 2533 lb/ft |
| Target Gross Machine Operating Weight | 219000 lb |
| Chassis Weight | 66579 lb |
| Body Weight | 20304 lb |
| Nominal Payload Class (100%) | 61 ton (US) |
| Top Speed - Loaded | 38.6 mile/h |
| Body Capacity - Struck | 34.8 yd³ |
| Steer Angle | 31 ° |
| Turning Circle - Clearance Diameter | 82 ft |
| Body Capacity - SAE 2:1 | 46 yd³ |
| Turning Diameter - Front | 72.2 ft |
| Raise Time | 9.5 s |
| Lower Time | 12.5 s |
| Forward - 1 | 6.2 mile/h |
| Forward - 2 | 8.6 mile/h |
| Forward - 3 | 11.7 mile/h |
| Forward - 4 | 15.7 mile/h |
| Forward - 5 | 21.2 mile/h |
| Forward - 6 | 28.5 mile/h |
| Forward - 7 | 38.6 mile/h |
| Reverse | 8.1 mile/h |
| Differential Ratio | 3.64:1 |
| Planetary Ratio | 4.8:1 |
| Total Reduction Ratio | 17.48:1 |
| Brake Surface - Front | 216 in² |
| Brake Surface - Rear | 9496 in² |
| Brake Standards | ISO 3450: 1996 |
| Pump Flow - High Idle | 130 gal/min |
| Relief Valve Setting - Raise | 2500 psi |
| Relief Valve Setting - Lower | 500 psi |
| Body Raise Time - High Idle | 9.5 s |
| Body Lower Time - Float | 12.5 s |
| Body Power Down - High Idle | 17.51 s |
| Struck | 34.8 yd³ |
| Heaped 2:1 (SAE) | 46 yd³ |
| Heaped 3:1 | 42.4 yd³ |
| Heaped 1:1 | 56.6 yd³ |
| Struck | 23.01 yd³ |
| Heaped (SAE 2:1)* | 32.9 yd³ |
| Note (1) | *ISO 6483:1980 |
| Front Axle - Empty | 47.3 % |
| Front Axle - Loaded | 33.3 % |
| Rear Axle - Empty | 52.7 % |
| Rear Axle - Loaded | 66.7 % |
| Effective Cylinder Stroke - Front | 5.2 in |
| Effective Cylinder Stroke - Rear | 5.9 in |
| Rear axle - Oscillation | 8.1 ° |
| Chassis | 66579 lb |
| Body | 20304 lb |
| Standard Liner | 8600 lb |
| Front Axle - Empty | 47.3 % |
| Front Axle - Loaded | 33.3 % |
| Rear Axle - Empty | 52.7 % |
| Rear Axle - Loaded | 66.7 % |
| Gross Vehicle | 219000 lb |
| Fuel Tank | 185 gal (US) |
| Cooling System | 32 gal (US) |
| Differential - Final Drives | 41 gal (US) |
| Steering Tank | 9 gal (US) |
| Steering System - Including Tank | 16 gal (US) |
| Torque Converter - Brake - Hoist Hydraulic Tank | 35 gal (US) |
| Brake Hoist System - Includes Tank | 81 gal (US) |
| Torque Converter - Transmission System - Including Sump | 19 gal (US) |
| Crankcase | 18 gal (US) |
| Torque Converter - Transmission System | 14 gal (US) |
| Standard Tire | 24.00-R35 (E4) |
| ROPS/FOPS Standards | Standards Meets SAE J1040 May94 and ISO 3471:1997 |
| Sound Standards | Meets SAE J88 APR95 |
| Turning Diameter - Front | 72.18 ft |
| Turning Diameter - Front Wheel Track | 72.18 ft |
| Steering Standards | Steering Standards Meets SAEJ1511 FEB94 and ISO 5010:1992 |
| Steer Angle | 31 ° |
| Turning Circle - Clearance Diameter | 82.02 ft |
| Height - Top of ROPS | 13.12 ft |
| Overall Body Length | 28 ft |
| Inside Body Length | 21 ft |
| Overall Length | 31.5 ft |
| Wheel Base | 13.75 ft |
| Rear Axle - Tail | 9.13 ft |
| Ground Clearance | 1.94 ft |
| Dump Clearance | 2.22 ft |
| Loading Height - Empty | 12.38 ft |
| Inside Body Depth - Maximum | 5.92 ft |
| Overall Height - Body Raised | 28.83 ft |
| Operating Width | 16.8 ft |
| Centerline Front Tire Width | 10.74 ft |
| Engine Guard Clearance | 2.2 ft |
| Overall Canopy Width | 14.43 ft |
| Outside Body Width | 12.8 ft |
| Inside Body Width | 12 ft |
| Front Canopy Height | 14.51 ft |
| Rear Axle - Clearance | 1.94 ft |
| Centerline of Rear Dual Tire Width | 9.6 ft |
| Overall Tire Width | 14.62 ft |